Fluke Calibration CIT                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Sub wait for ready state with PPC2+
DATE:                  2019-10-21 17:10:00
AUTHOR:                System Administrator
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       29
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON


  1.001  WAIT         -t 10 Waiting for pressure controller

  1.002  DO
  1.003  IEEE2        [@PPC2]PR[I$]
# Get the numeric portion of the response from MEM2
  1.004  MATH         MEM = MEM2
  1.005  HEAD         -2 Waiting for a stable reading: [MEM]
# Check the first character in MEM2 memory register to see if it is an "R"
  1.006  MATH         Ready = ZCMPI(SUB(MEM2,1,1),"R")>0
  1.007  UNTIL        Ready

  1.008  MATH         Dwell_ms = @DwellTime * 1E+3
  1.009  WAIT         -t [V Dwell_ms]Waiting for dwell time...

  1.010  HEAD         -2
  1.011  END