Fluke Calibration CIT                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Validyne Model P55D 8.0 PSI (Pos-Neg) with PPC2+
DATE:                  2019-10-21 17:10:32
AUTHOR:                Customer
REVISION:              1.2
ADJUSTMENT THRESHOLD:  100%
NUMBER OF TESTS:       11
NUMBER OF LINES:       116
CONFIGURATION:         HP 3458A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
#
  1.001  RSLT         = T.O. 33K6-4-1425-1 Technical Manual
#
# ****************************************************************************
  1.002  HEAD         ENVIRONMENTAL CONDITIONS
# ****************************************************************************
  1.003  DISP         Ensure the UUT has been allowed to stabilize in an
  1.003  DISP         environment with an ambient temperature of 18 to 28
  1.003  DISP         Degrees C and a relative humidity of < 90%.
#
# ****************************************************************************
  1.004  HEAD         INITIAL CONDITIONS & UUT HOOKUP
# ****************************************************************************
#
  1.005  ASK+                              U             Z
  1.006  ASK-   R     N              P                            A        W

  1.007  VSET         NMEAS = 1
# Auto assign
  1.008  HEAD         TEST SET UP PROCEDURE
  1.009  DISP         1. Connect DHI test port to transducer inlet (+).
  1.009  DISP         2. Ensure that pressure and vacuum supplies are on.
  1.009  DISP         3. Ensure that the transducer under test is +/- 8.0 PSI.
  1.009  DISP         (CODE 38)
  1.009  DISP         4. Attach connector to transducer.
  1.009  DISP         5. Turn on DC power supply and adjust to +15 VDC.

  1.010  RESET        [@PPC2]VENT=1[D1000]
  1.011  MATH         @DwellTime = 10

  1.012  HEAD         ZERO TEST
  1.013  TSET         TDESC = Nominal @ 0.00 PSI
  1.014  IEEE2        [@PPC2]MSGFMT=0
  1.015  IEEE2        [@PPC2]RANGE=2:LO
  1.016  IEEE2        [@PPC2]UNIT=PSIG
  1.017  IEEE2        [@PPC2]MODE=1
  1.018  IEEE2        [@PPC2]HS=.008
  1.019  IEEE2        [@PPC2]PS=0.00
  1.020  CALL         Sub wait for ready state with PPC2+
  1.021  DISP         Using 'Z' pot, adjust output to 0 Volts.
  1.022  3458   10    0.000V         0.025U                                2W

  2.001  HEAD         1.25 VOLT TEST
  2.002  TSET         TDESC = Nominal @ 2.00 PSI
  2.003  IEEE2        [@PPC2]PS=2.0
  2.004  CALL         Sub wait for ready state with PPC2+
  2.005  3458   10    1.250V         0.025U                                2W

  3.001  HEAD         2.5 VOLT TEST
  3.002  TSET         TDESC = Nominal @ 4.00 PSI
  3.003  IEEE2        [@PPC2]PS=4.0
  3.004  CALL         Sub wait for ready state with PPC2+
  3.005  3458   10    2.500V         0.025U                                2W

  4.001  HEAD         3.75 VOLT TEST
  4.002  TSET         TDESC = Nominal @ 6.00 PSI
  4.003  IEEE2        [@PPC2]PS=6.0
  4.004  CALL         Sub wait for ready state with PPC2+
  4.005  3458   10    3.750V         0.025U                                2W

  5.001  HEAD         5 VOLT TEST
  5.002  TSET         TDESC = Nominal @ 8.00 PSI
  5.003  IEEE2        [@PPC2]PS=8.0 [D30000]
  5.004  CALL         Sub wait for ready state with PPC2+
  5.005  3458   10    5.000V         0.025U                                2W

  6.001  HEAD         ZERO2 TEST
  6.002  TSET         TDESC = Nominal @ 8.00 PSI
  6.003  IEEE2        [@PPC2]PS=0
  6.004  CALL         Sub wait for ready state with PPC2+
  6.005  3458   10    0.000V         0.025U                                2W

# SET RANGE TO HI RANGE MODULE SLOT 5
  7.001  IEEE2        [@PPC2]RANGE=1:HI

  7.002  HEAD         -1.25 VOLT TEST
  7.003  TSET         TDESC = Nominal @ -2.00 PSI
  7.004  IEEE2        [@PPC2]PS=-2.0
  7.005  CALL         Sub wait for ready state with PPC2+
  7.006  3458   10    -1.250V        0.025U                                2W

  8.001  HEAD         -2.5 VOLT TEST
  8.002  TSET         TDESC = Nominal @ -4.00 PSI
  8.003  IEEE2        [@PPC2]PS=-4.0
  8.004  CALL         Sub wait for ready state with PPC2+
  8.005  3458   10    -2.500V        0.025U                                2W

  9.001  HEAD         -3.75 VOLT TEST
  9.002  TSET         TDESC = Nominal @ -6.00 PSI
  9.003  IEEE2        [@PPC2]PS=-6.0
  9.004  CALL         Sub wait for ready state with PPC2+
  9.005  3458   10    -3.750V        0.025U                                2W

 10.001  HEAD         -5 VOLT TEST
 10.002  TSET         TDESC = Nominal @ -8.00 PSI
 10.003  IEEE2        [@PPC2]PS=-8.0
 10.004  CALL         Sub wait for ready state with PPC2+
 10.005  3458   10    -5.000V        0.025U                                2W


 11.001  IEEE2        [@PPC2]VENT=1
 11.002  3458         *                                                 S

 11.003  END