Question :
How can I turn on the logger/recording mode on the 700G ?
Answer:
The 700G Manometer has a logger/recorder mode. This can be activated on the 700G itself.
Press Config -> Log Data is shown. Then press Enter -> Log off is shown. Then press up(zero) or down(Min/max) -> Log Start is shown and again press Enter.
The 700G will now show alternating LOG and RUN with a number. And this is shown as long as the manometer is logging.
The optional 700G/Track software is required to download a logging from the 700G manometer.
https://www.fluke.com/en-us/product/fluke-software/fluke-700g-track