Here are spare parts that are available for 2700G digital gauges. If the USB cable is used to power the gauge (with the power adapter or by computer USB port) the batteries do not need to be installed.
| Fluke P/N | Description | Sellable To |
| 4201079 | 2700G-8001 BOOT REFERENCE PRESSURE GAUGE GREY | customer |
| 4201101 | 2700G-8004 DECAL MANIFOLD BG100K 15PSI 0.1MPA | customer |
| 4201112 | 2700G-8005 DECAL MANIFOLD BG200K 30PSI 0.2MPA | customer |
| 4201120 | 2700G-8006 DECAL MANIFOLD BG700K 100PSI 0.7MPA | customer |
| 4201135 | 2700G-8007 DECAL MANIFOLD BG2M 300PSI 2MPA | customer |
| 4201147 | 2700G-8008 DECAL MANIFOLD BG3.5M 500PSI 3.5MPA | customer |
| 4201158 | 2700G-8009 DECAL MANIFOLD BG7M 1000PSI 7MPA | customer |
| 4201164 | 2700G-8010 DECAL MANIFOLD G20M 3000PSI 20MPA | customer |
| 4201173 | 2700G-8011 DECAL MANIFOLD G35M 5000PSI 35MPA | customer |
| 4201186 | 2700G-8012 DECAL MANIFOLD G70M 10000PSI 70MPA | customer |
| 4252495 | POWER SUPPLY,SW,5W,85-264VAC,5V@1A,3KV,W/MAINS ADAPTERS,USB OUT,UNIV,WALL MOUNT | customer |
| 4450539 | (1920041),CABLE, FLUKE 2700G COMMUNICATION | customer |
Note that the USB cable shown in the manual is not available (part number 4258329). The correct part number is shown in the last line of the above table, 4450539.
If the threads of a BG700K (100 psi) or higher are damaged, the entire gauge must be replaced with a new one. The threads are part of the sensor assembly (not the manifold) and are not replaceable. The manifold (hex nut) of the BG700K (100 psi) and higher ranges can be replaced.
If the threads of a BG100K (15 psi) or BG200K 30 psi) are damaged, the manifold can be replaced.
Contact an Authorized Service Center for manifold replacement.