*****************************************************************************************************
RPTLoad version 2 should be used for almost all Fluke/DHI models. See this article about RPTLoad version 2, RPTLoad version 2 for loading coefficient files to RPTs, Q-RPTs and PM Modules
*****************************************************************************************************
The RPTLoad program is designed to transfer RPT coefficients to and from Fluke Calibration DHI model products with quartz RPTs. In addition to updating coefficients, RPTLoad can also be used to configure RPM1 reference pressure monitors.
RPTLoad is freeware and can be downloaded from the Fluke Calibration website, RPTLoad
RPTLoad software is not compatible with 64-bit operating systems and must be installed on Windows 32-bit operating systems.
The RPTLoad installation software must be run from the root c:\ directory or an error will pop-up "Unable to read install disk ID file 'C:DISK.ID'". If you receive this error move the downloaded install file to the root c:\ directory and run it again.
If you encounter further difficulty please contact Pressure Calibration Technical Support at Pressure Support or call us at +1.877.355.3225