Common spare parts for PG7102, PG7202, PG7302 and PG7601. Some parts noted for PG9602 and PG9607.
All parts are shown with 7-digit Fluke part number followed by description. 6-digit part number in description may be old DHI part number.
Sebacate Fluid, typically used as internal reservoir fluid in PC-7200-500, -1 and -2 piston-cylinder modules, and as operating fluid in PG7302, PG7307, PPCH, OPG1, 2485, MPG1, MPG2, E-DWT-H
3069043, FLUID, SEBACATE, 1 QT
3069551, FLUID, SEBACATE, 1 GAL
Sebacate MSDS sheet is here, Sebacate MSDS
Synturion 6 Fluid, typically used as internal reservoir fluid in PC-7200-100 and PC-7200-200 piston-cylinder modules
3070797, FLUID-401848,FLUID, SYNTURION 6, 1 QT
Synturion MSDS sheet is here, Synturion MSDS
Krytox Lubricant for P-C module lubrication. See Section 5.3.5 "Lubricating Piston-Cylinder Modules" in PG7000 Operation and Maintenance Manual
2493420, (102496) Krytox® GPL205/6 High Temp Lubricant, 0.5 oz. tube
Krytox GPL205/206 MSDS Sheet is here, Krytox Lubricant MSDS
Krytox Fluid, typically used in hydrocarbon free PG7202 piston gauge systems as the internal reservoir fluid in the piston-cylinder module
3071768, FLUID, KRYTOX GPL-102, 60 ML (114 G)
3466713, KRYTOX GPL-102, 1 QT (4.0 LB)
Krytox GPL-102 MSDS sheet is here, Krytox Fluid MSDS
AutoRotate Drive o-rings for PG7000 (quantity 2 are used)
3135041 , (101976) O-ring, Buna 2-242
Gloves, mass handling, cotton, Fluke Calibration logo
3134337, Must be ordered in pack of 12 pair (1 dozen)
Piston-Cylinder Module O-Rings The part numbers for each are in
Section 2.1.2.3 of the PG7000 Operations and Maintenance Manual and are below.
PC-7600/7100
10 kPa/kg tungsten carbide, 10 kPa/kg ceramic, 20 kPa/kg
3134867, (101918) Viton, Brown, size 2-222, FKM, 0.139 IN W, 1.484 IN ID, 75 durometer
3136458, (102380) Viton, Brown, size 2-130, FKM, 0.103 IN W, 1.612IN ID, 75 durometer
50 kPa/kg, 100kPa/kg, 200 kPa/kg
3134880, (101921) Viton, Brown, size 2-120, FKM, 0.103 IN W, 0.987 IN ID, 75 durometer
3136458, (102380) Viton, Brown, size 2-130, FKM, 0.103 IN W, 1.612 IN ID, 75 durometer
PG 7202, all piston cylinders have the same o-rings. It's most convenient to purchase a kit that includes the o-rings, syringe and fluid.
This kit includes Sebacate fluid and is for the PC-7200-500 kPa/kg, -1 MPa/kg and -2 MPa/kg models
3120315 (401723),KIT,ACCY,PC,L/G,DHI W/SEB
PN Qty Description
2721018 1 O-RING,NITRILE,SHORE A 70,AS 568A-020,.864 ID,.070 W
3134158 2 101295,O-RING,NITRILE,SHORE A70,AS 568A-016,.614 ID,.070 W
2644003 1 O-RING,NITRILE,SHORE A 70,AS 568A-117,.799 ID,.103 W
3139421 3 103045,TIP,SYRINGE,16GA,LUER LOK
3139439 1 103046,SYRINGE,10ML,LUER LOCK
3148417 1 123444,RING,ANTI-EXTR,OD=25MM
3120590 1 401793,ASSY,SEBACATE,4FL OZ
This kit includes Synturion fluid and is for the PC-7200-100 & -200 kPa/kg models
3120277 (401743),KIT,ACCY,PC,L/G,DHI W/S6
PN Qty Description
2721018 1 O-RING,NITRILE,SHORE A 70,AS 568A-020,.864 ID,.070 W
3139421 3 103045,TIP,SYRINGE,16GA,LUER LOK
2644003 1 O-RING,NITRILE,SHORE A 70,AS 568A-117,.799 ID,.103 W
3134158 2 101295,O-RING,NITRILE,SHORE A70,AS 568A-016,.614 ID,.070 W
3120289 1 401794,ASSY,SYNTURION 6,4FL OZ
3139439 1 103046,SYRINGE,10ML,LUER LOCK
Some parts are available separately.
3134158, (101295), Buna 2-016, (qty 2), top and bottom of cylinder
2721018, (101102), Buna 2-020, upper sleeve
2644003, (102109), Buna 2-117, lower sleeve, interfaces with mounting post
3148417, (123444), RING,ANTI-EXTR,OD=25MM (500 kPa/kg, 1 & 2 MPa/kg only) for upper sleeve o-ring (only available in kit part number 3120315)
Syringe for PG7202 piston cylinder modules ((only available in kit part number 3120315 or 3120277)
3139421 TIP,SYRINGE,TAPERED,18GA,LUER LOCK,POLYPROPYLENE,GREEN
3139439 (103046),SYRINGE,10ML,LUER LOCK
PC-7300
100 kPa/kg, 200 kPa/kg, 500 kPa/kg
2527053, (103990) Viton, Black 2-014, upper o-ring body
3134022, (101100) Buna 2-015, lower o-ring body, interfaces with mounting post
1 MPa/kg, 2 MPa/kg, 5 MPa/kg
1785497, (101096) Buna 2-010, upper o-ring body
927863, (101294) Buna 2-011, lower o-ring body, interfaces with mounting post
PG7601 Bell Jar and Bell Jar Seal
3068933 122106,BELL JAR, PG7000 PYREX (does not include seal)
3068634 SEAL,BELL JAR,9.25 IN. ID,0.75 IN. T,VITON
AMH-38 to PG7600 Seal (o-ring)
3141923 O-RING,FKM,VITON,.139IN W,9.734IN ID,75 DURO,BROWN,SIZE 2-273
PG7102, PG7601 and PG9602 Piston-Cylinder Module Tools
3068940 (122568),Sleeve Nut Tool (included with PG7102 or PG7601 base)
Piston Insertion Tool for 10 kPa/kg piston cylinder modules (included with modules)
3071841, (402394) Piston Insertion Tool for PC-7100/7600-10-TC (500 gram model)
3071793, (402371), Piston Insertion Tool for PC-7100-7600-10-L (400 gram model)
33068940 (122568),Sleeve Nut Tool
PG7601 Vacuum Parts
3068760 (VLV-102763),VALVE, VACUUM SHUTOFF, KF25
3134533 (101542),RING,SS,CTR,VITON,KF25
3135575 (102121),CLAMP,KF25,ALUM,WING NUT
3143561 (103737),HOSE,VAC,PVC,KF25,48IN W/FL
3068634 SEAL,BELL JAR,9.25 IN. ID,0.75 IN. T,VITON
3070854 (PK-7600-VAC-VENT),FAST VENT VACUUM VALVE KIT
PG7000 Terminal
3069735 - Terminal - (401284),PG TERMINAL, PG7000 (NO CABLES) CE
3068724 - Cable, PG700102227,CABLE, PG BASE TO PG TERM, DB25M-DB25F, 6FT (NOT CE)
3072235 - Cable, (102227) CE,CABLE, PG BASE TO PG TERM, DB25M-DB25F, 1.8M,CE
3133781 - Power Cord, LINE CORD,N AMERICA,10A,125V,NEMA5-15P TO C13,3X18AWG,SVT,2.3M,BLACK
3153005 - Power Cord, LINE CORD,EUROPE,10A,250V,CEE7/7 TO C13,3X1MM,H05VVF3G,2.1M,GRAY, CE
Official information, quotations and terms and conditions can be obtained from our Orders group at 1.877.355.3225 or by email to Orders Group
Purchase order may be faxed to 1.425.446.5716 or emailed to Orders Group
Credit card orders can be made by phone by calling 1.877.355.3225
Pressure Technical Support can be contacted at the same phone number, or at the link below.