This Article is about Creating Report that includes both Phase to Phase and Phase to Neutral results.
The Fluke power quality tools cannot measure both phase to neutral and phase to phase at the same time.
You need to setup the tool and select Phase to Neutral or Phase to Phase and once you're done recording, you can download the data to the Energy Analyze Plus software. In the software go to the Advanced function to create graphs for the other parameter.
Here is an example of the setup to be 3 Phase WYE 277V and the file was saved to Energy Analyze Plus.
You can use the software for results related to Phase to Neutral voltage results. If you want to show the Phase-to-Phase results you use the Advanced function.
When you want something in the Report go to the top left of the window and click on Add Bookmark and you can use it in the Report section of the software.
Project Manager Tab.
Energy Study Tab
Advanced Tab
Once you click on Advanced you click on the Configure box on the right.
Put check marks in the avg, A, B, C and the Voltage (P-P) boxes and then click on the OK button at the bottom.
Below are the Phase-to-Phase 480V results.