This article is meant to guide you through the process of downloading the Calibration Certificate for the Fluke TiS60+, Ti300+, Ti400+, Ti401 Pro, Ti480 Pro, TiX501, TiX580, RSE300, RSE600 Cameras. In this example, I used the TiS60+ but the process is the same for all the model numbers listed.
The process for getting the Certificate of Calibration is to have the camera connected to a PC using a USB cable, and open either the Fluke Connect Desktop software or Smartview software.
Here is the link to our web page to get both of the software programs.
Download Software here
Downloading Calibration Certificates
Fluke Connect Method
If you use Smartview click on the dropdown arrow and then click on Download Calibration Certificate From Camera.
SmartView Method
Connect Camera to SmartView. An icon should appear with a drop-down in the menu bar.
Click on the Camera Idon to show the drop-down menu.
Navigate to Download Calibration Certificate
Select the Location to save the file to, and give the file name for the calibration certificate.
It will then generate a PDF of the Calibration Certificate.
If are unable to see the TiS60+ show up in either program it means the USB driver did not install automatically. You will need to open another article named Installing RNDIS Driver.