ULD-410 Product Resources
This article is to provide easy access to online resources for the Amprobe ULD-410 Ultra Sonic Leak Detector. Below you will find links to useful resources for the ULD-410.
Introduction
The ULD-410 is intended for use in detecting leaks, electrical discharge, and vibrations that emit audio in the 20 kHz to 90 kHz range.
Datasheet
ULD-410 Datasheet (en Español)
Manual
Useful Videos
How to Pinpoint an Ultrasonic Leak with the Amprobe UD-400 Series.
ULD-400 series Overview.
How to find Ultrasonic Leaks in De-pressurized Systems with ULD-400 series.
How to Find Ultrasonic Leaks in Noisy Environments with the ULD-400 series.
Specifications
| ULD-400-R Receiver | ULD-400-T Transmitter | |
| Sensitivity Adjustment | Yes | N/A |
| Volume Adjustment | Yes | N/A |
| Signal Level Adjustment | N/A | Yes |
| Earphone Jack (3.5 mm) | Yes | N/A |
| Display Size | LCD 2.5 in (6.35 cm) | N/A |
| Display Dimensions | 1.45 x 1.93 in (36.72 x 48.96 mm) | N/A |
| Display Resolution | 240(RGB) x 320 pixels | N/A |
| Display Type | TFT-LCD (262 K) | N/A |
| Display Color | True, 16bit/color | N/A |
| Frequency Range | 20 kHz to 90 kHz | Typical 40 kHz squarewave |
| Filter | ±5 KHz of main noise frequency, up to three filters | N/A |
| Power Supply | 4 x 1.5 V AA (LR6) alkaline batteries | 2 x 1.5 V AAA (LR03) alkaline batteries |
| Power Consumption (typical) | 75 mA | 33 mA |
| Battery Life (typical) | 105 hours (Alkaline) | 60 hours (Alkaline) |
| Low Battery Indication |  | Yes (Red LED) |
| Weight | Approx. 0.518 lb (0.235 kg) | Approx. 0.335 lb (0.152 kg) |
| Dimensions | 7.547 x 2.984 x 1.791 in (183 x 75 x 43 mm) | 5.295 x 2.559 x 1.326 in (137 x 65 x 33 mm) |
| APO function | 60 minutes when in idle | |
| Operating Temperature | -4 °F to 122 °F (-20 °C to 50 °C) | |
| Storage Temperature | -4 °F to 158 °F (-20 °C to 70 °C) | |
| Operating Humidity | <80% RH | |
| Pollution Degree | 2 | |
| Protection | IP40 | |
| Certifications |  | |
| Electromagnetic Compatibility (EMC) | EN 61326-1 Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) [1] [1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes. | |