This Article is about reviewing Event data in the Energy Analyze Plus software.
Below are the steps to manage the Energy Analyze Plus software to review the Event waveform data.
The screen below is showing the Project Manager and the Measurement Settings. The Recorded Event section informs you if any Events occurred.
The next step is to locate the Events and evaluate them. You click on the PQ+ Study tab and then click on Events.
On the right-hand side of the screen are different parameters you can check and uncheck to view Events.
Below the Dip Events are checked and you get the list of Dip Events.
Below is the RMS profile of the Dip Event for volts and if you want to view the Wave shape data click on that circle.
You can also look at the current levels if you click on Curr and select the phases you want.
Below is the Wave shape data.