This Article is about how to set the Pin number, User Name and Password for the Fluke-1770 Series.
When you turn on the Fluke-1770 Series the first time you have to walk through the configuration process. The list of items are Language, Phase Labels, Time Zone, Date and Time, PIN, Password, Nominal Voltage and Nominal Frequency.
Below are screen shots walking through the configuration process.
When you turn on the Fluke-1770 Series for the first time it starts the Configuration process with Language. Highlight the Language and the tap on Next at bottom of screen.
Once you make your choices select the Next button at bottom of screen.
Highlight the Time Zone and then select Next at bottom of screen.
Highlight country and then select Next at bottom of screen.
Highlight region and then select Next at bottom of screen.
Make choices and then select Next at bottom of screen.
You have to tap on the yellow box to create the PIN number. The window changes to allow you to type a number and then select the Next choice at the bottom of window. You have to enter the number again to confirm your number and then push the Next.
Tap on the Next choice at the bottom of the screen if you are satisfied with the PIN number, otherwise select Back at bottom of screen.
Tap on the yellow box to create a Username. Fill in the section with the Username and select Next at bottom of screen and you need to type the Username again to confirm the Username.
Tap on the yellow box to open another window for the Password. Fill in the section with the Password and select Next at bottom of screen and you need to type the Password again to confirm the Password.
If you are satisfied with the Username and Password, select Next at the bottom of the screen if not select Back.
Highlight the Nominal voltage for your system and select Next at the bottom of the screen.
Make a choice and then select Next at the bottom on the screen.
Note the Inverter output is related to power from a VFD to power the Fluke-1770 Series. Select Confirm to move to the next screen.
Tap on screen for your choice.
Here is what the display shows when you are done with the setup parameters.