This tutorial walks the user through the process of updating the embedded firmware of the PPC4. The firmware file has a “.bin” extension. It is written to the PPC4 using the “WinFlash.exe” application. The PPC4’s RS232 COM1 port is the interface used to perform the update.
The tutorial is the attached file "Firmware Update Tutorial_PPC4.docx". Open or download it by clicking the link below.
The attached file "Winflash.setup" is for configuring the selection and use of the PPC4 embedded firmware file. It is exclusive for use with the Winflash.exe program for updating the firmware for the PPC4 pressure controller / calibrator to version 1.2.6.14
Download and save the setup file to the root WinFlash directory. This is typically "C\Program Files (x86)\WinFlash". If using a 32-bit Windows computer then the typical location is "C:\Program Files\WinFlash" and the setup file content will require an edit to be made to the file path.
Contact Fluke Calibration Pressure Technical Support by the link below this article, or by calling us at +1.877.355.3225